ANFIBIO REBEL 2K

 

On long trekking tours with lake crossings, where the boat is little used, to extended river tours on fast-moving waters, the Rebel 2K can do it all. From expeditions to after-work paddles, with the emphasis of land-water use, the Rebel 2K will inspire you for great adventures.

 

Although the Rebel 2K can sustain whitewater use (due to its shape, volume and spraydeck configuration), we do not designate it specifically a whitewater packraft. We make other models for this kind of primary use. For increased performance, additional accessories such as a footrest, thigh straps or a floor mat may prove useful. However, they aren’t necessary for regular use.

 

The boat is paddled kayak style and is inflated with a big inflation bag which attaches to the boat via a screw-in valve.

 

 

 

The Rebel 2K has the following characteristics:

 

The Anfibio Rebel 2K distinguishes itself with a unique spraydeck design: 

The spraydeck extends the Rebel 2K’s range of applications enormously. Whether on waves, splashes or in cold, rainy conditions, the cozy spraydeck adds comfort and safety. It is not 100% leak proof (the zipper may let penetrate some water), but it is adequate in moderate conditions. The spraydeck is easy to open and close, but the Rebel can also be paddled in open configuration (spraydeck fixed/rolled up). This makes the packraft suited to tours with frequent exits, e.g. when portaging, scouting, emergency exits or training sessions.

 

 

Anfibio TubeBags are two centrally positioned, IPX7-rated waterproof luggage compartments holding 70 litres each with waterproof zippers and inner pockets. The luggage compartment and the main hull air chamber are two separate air spaces. The zippers don’t have to be airtight to function because it’s not necessary by design. The system retains its integrity, even with slightly opened zippers. This makes the seal very resistant to dirt and wear.

Other TubeBag benefits 

Set up: Open zipper, stow the luggage (load the inside pockets), close the zippers, then inflate the main air chamber. Top up air pressure after initial use.

Break down: Open the main valve first! Then open the TubeBag zippers and unload the luggage.

 

 

The mount for a skeg (fin) is attached as standard. The skeg can be added if required. This increases directional stability, paddle efficiency and speed. This is particularly useful for sea crossings or when taking photographs from the boat.

 

Seat 

 

The Anfibio Rebel 2K is equipped with a comfort-seat which is wider and higher than our standard seat. This seat works well with the spraydeck. Tightly inflated, the seat position is upright, offering a good overview and a secure paddle stance.

 

 

The boat features also a hand strap the inside of the boat. Avoid carrying it by the spraydeck. 

 

 

Like all Anfibio Packrafts, the Rebel 2K is made from a special 210/840 urethane nylon fabric which has a high tear and abrasion resistance combined with low weight. The smooth, shiny surface of the tube coating is particularly scratch resistant.

 

All the boat’s seams are fully welded and the tube seams are additionally sewn, making it a completely glue-free construction. This saves weight, costs and the environment! We are so confident with our build we provide an extended 3-year warranty on materials and workmanship.

No in?atable is indestructible of course, but in the (unlikely) event of damage, in the ?eld repairs can be made within a couple of minutes with LifePatch or Patch`n Go, which bonds permanently to the urethane surface. Small pinholes can be sealed with Stormsure, a liquid urethane sealant.

Carbon footprint
All Anfibio Packrafts produced since 2018 have been carbon offset through selected climate protection projects. Learn more.

Social standards
Anfibio pays attention to safe and fair working conditions during the production. How we check social standards during manufacturing, we describe here.

• Pack strap
• Inflation bag
• Inflatable comfort seat with integrated backrest
• Repair fabric (spare tube and floor material)
• User’s manual

• Tubes: 210D Urethane-Nylon (single-sided, multiple coating and surface finish)
• Spraydeck: 75D Urethane-Nylon (single-sided coating)
• TubeBags: 75D Urethane-Nylon (single-sided coating)
• Floor: 840D Urethane-Nylon (double-sided, multiple coating and surface finish)
• Seat: Nylon 210D/118T laminated 

• Boat without TubeBags: 2055 g
• Boat with TubeBags: 2645 g
• Seat: 315 g (removable)

Boat complete without TubeBags: 2370g
Boot complete with TubeBags: 2960g

• Pack strap: 25 g
• Inflation bag: 100 g
• Repair fabric: 20 g

• Length: 127 cm
• Width: 37 cm

• Length: 231 cm
• Width: 91 cm

• boat with TubeBags: 80,34 kg, calculation details according to reference model
• boat without TubeBags: 70,07 kg, calculation details according to reference model